Siemens servo motors

Siemens servo motors in mumbai

Siemens AG Germany is leading company engaged in the manufacturing and development of the all the components required for the industrial burner industry. Servomotors are used to control the air supply and gas supply dampers automatically through the signal from the controller to ensure efficient combustion in these burners. These are supplied in different models like SQM, SQN, and other series. Basic parameters are the voltage, torque, timing, and degree of movement. These are mainly used in two stage as well as in modulating burners of different makes of industrial burners.

Petercem Photocell

Photocells are basically a resistor that changes its resistive value (in ohms Ω) depending on how much light is shining onto the squiggly face. They are very low cost, easy to get in many sizes and specifications, but are very inaccurate. Each photocell sensor will act a little differently than the other, even if they are from the same batch. The variations can be really large, 50% or higher! For this reason, they shouldn't be used to try to determine precise light levels in lux or millicandela. Instead, you can expect to only be able to determine basic light changes.

Petercem photocell 8209

The photocell is utilized in the Industrial burners for detecting the nearness and nonattendance of fire. It gives the photovoltaic flag to the controller with the goal that further grouping of ignition can happen

Petercem Photocell 8205

Petercem is the old name, the new name of the organization is ECEE France. It has been assumed control by Cabri Group now. This 8209 signifies the specific model no of this photocell which can be utilized alongside controller Petercem MA 55 made by a similar organization.

Petercem photocell 8205

The photocell is utilized in the Industrial burners for detecting the nearness and nonappearance of fire. It gives the photograph voltaic flag to the controller with the goal that further grouping of burning can occur. Petercem is the old name, the new name of the organization is ECEE France. It has been assumed control by Cabri Group now. This 8205 means the specific model no of this photocell which can be utilized alongside controller Petercem MA 810 made by a similar organization.

Monarch oil burner nozzles

These are Monarch oil burner nozzles made in USA by Monarch, These are used in Industrial Heating Purposes in monobloc automatic burners used in boilers, furnaces, ovens etc. These are made of stainless steel with hardened tip and they are specified by the type, capacity in gallons per hour and spray angle. They are made with different types of spray patterns like R, PLP, NS etc. These nozzles are suitable for light oils like HSD, diesel etc as well as separately for Heavy Oils.